Brother PT-9600 Printer User Manual


 
81
Ch. 4 Machine Adjustments
Machine Adjustments
3 Press m or g until the desired setting is
displayed.
4 Press n to apply the setting.
To change the TAPE LENGTH ADJUST setting:
When printing a label with a specified length
(Tape Length function), the length of the printed
label may be slightly different. This function
allows you to adjust the length of the printed
label.
1 Hold down d and press A.
2 Press j or k until TAPE LENGTH
ADJUST is displayed.
3 Press m or g until the desired setting is
displayed.
4 Press n to apply the setting.
To change the HEAD ADJUSTMENT setting:
This function allows you to shift the printing up
or down within the tape.
1 Hold down d and press A.
2 Press j or k until HEAD ADJUSTMENT
is displayed.
3 Press m or g until the desired setting is
displayed.
4 Press n to apply the setting.
NOTE
To return the function to its default setting (0), press
the space bar.
NOTE
To apply several Setup settings at the same time,
continue pressing j or k to select the function,
then pressing m or g to select the desired setting.
Press n only after the necessary functions have
been set.
NOTE
If the tape length cannot be adjusted satisfactorily
using this function, small adjustments can be made
to the tape length using the Tape Length function.
NOTE
This step may be skipped if settings for several
Setup functions are being applied at the same time.
NOTE
To return the function to its default setting (0),
press the space bar.
To decrease the label length, select a lower
value. To increase the label length, select a
higher value.
Length Margin Font Width Size
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
04/07
TAPE LENGTH ADJUST
00
AUTO 1.00 HELSINKI A AUTO
L
M
NO
NOTE
To apply several Setup settings at the same time,
continue pressing j or k to select the function,
then pressing m or g to select the desired setting.
Press n only after the necessary functions have
been set.
NOTE
This function does not adjust printing on 1 1/2" (36-
mm)-wide tape.
NOTE
This step may be skipped if settings for several
Setup functions are being applied at the same time.
NOTE
To return the function to its default setting (0),
press the space bar.
To shift the printing down, select a lower value.
To shift the printing up, select a higher value.
NOTE
To apply several Setup settings at the same time,
continue pressing j or k to select the function,
then pressing m or g to select the desired setting.
Press n only after the necessary functions have
been set.
Length Margin Font Width Size
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
05/07
HEAD ADJUSTMENT
00
AUTO 1.00 HELSINKI A AUTO
L
M
NO