Brother PT-9600 Printer User Manual


 
85
ERROR MESSAGE LIST
INTERFACE ERROR!
This message appears if the
wrong port is selected for a USB
connection.
Windows
Under “Print to the following
port” in the printer Properties
dialog box, select “PTUSB:”
for the USB connection.
For Windows 98 and Me:
If two or more of the same
P-touch model are con-
nected through their USB
ports, instead of “PTUSB:”,
select “PTUSB (PT-3600/
9600-XXXXXXXXX):”
(where XXXXXXXXX is the
serial number). The serial
number is written above
the barcode on the silver
label attached to the bot-
tom of the P-touch.
For Windows 2000 and XP:
The P-touch can be added
as a second printer.
Macintosh
In the Chooser, select the PT-
3600/9600 as the printer.
This message appears if the
wrong port is selected for a
serial (RS-232C) connection.
Specify correct settings for
the BAUDRATE, BIT
LENGTH, PARITY and
BUSY interface parame-
ters.
Check that the interface
cable is correctly con-
nected.
INVALID CHARACTERS!
This message appears if a time
stamp or user-defined character
image is selected when you try
to use the Numbering function.
Select text or a barcode
before trying to use the
Numbering function.
LENGTH LIMIT!
This message appears if you try
to print or use the Layout Pre-
view function when the length
of the text is greater than the 3'
1/3" (1 m) limit.
Delete some of the text.
ERROR MESSAGE CAUSE SOLUTION