Cabletron Systems 2M46 Switch User Manual


 
Chapter 1:
Changes to Local Management Screens
1-6 Local Management Supplement
1.3 DEVICE CONFIGURATION MENU SCREEN
The Device Configuration Menu screen, Figure 1-4, provides access to
Local Management screens that allow you to configure and monitor
operating parameters, modify SNMP community names, set SNMP traps,
configure switch parameters and configure ports.
To access the Device Configuration Menu screen from the Device Menu
screen, use the arrow keys to highlight the
DEVICE
CONFIGURATION
menu item and press ENTER. The Device
Configuration Menu screen displays.
Figure 1-4 Device Configuration Menu Screen
The following briefly explains each screen accessible from the Device
Configuration Menu screen:
GENERAL CONFIGURATION
Used to monitor and configure SmartSwitch operating parameters. For
details, refer to your SmartSwitch device user’s guide.
SNMP COMMUNITY NAMES CONFIGURATION
Used to enter new, change, or review the community names used as
access passwords for device management operation. Access is limited
based on the password level of the user. For details, refer to your
SmartSwitch device user’s guide.
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES CONFIGURATION
SNMP TRAPS CONFIGURATION
SYSTEM RESOURCES INFORMATION
FLASH DOWNLOAD CONFIGURATION
PORT CONFIGURATION MENU
802.1 CONFIGURATION MENU
19602_66
RETURN
EXIT