Filter
Top Products
Chapter 1: Changes to Local Management Screens
1-50 Local Management Supplement
6. Use the arrow keys to highlight the IGMP Version field. Then use the
SPACE bar to select the proper IGMP version for the VLAN shown in
the VLAN ID field.
7. Use the arrow keys to highlight the remaining fields: Query Interval,
Query Response Time, Interface Robustness, and Last Member
Query Interval. Enter the desired numbers in each field.
8. Use the arrow keys to highlight the SAVE command and press the
ENTER key to save the information in all the fields that were changed.
The event message line will indicate “SAVED OK” and the screen can
now be exited. To set up a VLAN, refer to the Cabletron Systems 802.1Q
VLAN User’s Guide.
1.20 PRIORITY/MULTICAST CONFIGURATION MENU
SCREEN
The Priority/Multicast Configuration Menu screen, Figure 1-20, provides
access to the Port Priority Configuration, and Advanced Port Priority
Configuration screens These screens are used for the following:
• Setting the default priority of frames received without a priority
setting.
• Mapping the frame priorities to transmit queues for each front panel
port. The number of ports is dependent on the SmartSwitch model.
To access the Priority/Multicast Configuration Menu screen from the
802.1 Configuration Menu screen, use the arrow keys to highlight the
802.1p PRIORITY CONFIGURATION MENU item and press
ENTER. The Priority/Multicast Configuration Menu screen displays.
TIP
When configuring IGMP, it is advisable to follow the IGMP
configuration rules in RFC 2236 concerning switches and
routers.
NOTE
The 802.1p Priority Configuration Menu item cannot be
selected from the Port Priority Configuration screen when the
operational mode of the device is set to 802.1D SWITCHING.