Filter
Top Products
Port Redirect Configuration Screen
Local Management Supplement 1-29
Frame Format (Read-Only)
Displays the current frame format setting: NORMAL, TAGGED or
UNTAGGED The default is NORMAL.
• NORMAL – Frames are redirected in the format that they were
received or transmitted on the source port.
• TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification.
• UNTAGGED – Frames are transmitted on the destination port without
a VLAN tag regardless of the format of the received frame.
Redirect Errors (Read-Only)
Displays whether the corresponding source ports are configured ON to
send errored frames to the destination ports, or OFF to drop all errored
frames and only forward valid frames to the destination ports. All
redirected error frames display in the way they were received or
transmitted on the source port, regardless of the frame format setting.
Source Port [
n
] (Selectable)
Used to select the port [n] that is to be changed to a source port. If a port
is currently being redirected, it will not display as a selectable port. For
details, refer to Section 1.11.1.
Destination Port [
n
] (Selectable)
Used to select the port [n] that is to be changed to a destination port. If a
port is currently being redirected, it will not display as a selectable port.
For details, refer to Section 1.11.1.
Frame Format (Selectable)
Used to select the frame format for the transmission of redirected frames
on the destination port. NORMAL, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format field
for details about each format. The default setting is NORMAL.
Redirect Errors (Toggle)
Used to set each source port to either ON, to send errored frames to its
destination port, or OFF to drop errored frames, and send only valid
traffic to its destination port. The default setting is OFF.
Status (Toggle)
Used to add or delete source and destination ports selected in the Source
Port [n] and Destination Port [n] fields.