Filter
Top Products
IGMP/VLAN Configuration Screen
Local Management Supplement 1-47
Figure 1-19 IGMP/VLAN Configuration Screen
The following describes each field of the IGMP/VLAN Configuration
screen:
IGMP Version (Toggle)
Displays the current configured IGMP version running on the VLAN
selected in the VLAN ID field (version 1 or 2). The default is version 2.
The IGMP Version field can be toggled to configure the switch in either
version 1 or 2 to match the router configuration. For IGMP to function
correctly, all switches on a LAN must be configured to run the same
version of IGMP.
Query Interval (Modifiable)
If the switch is the querier, the value in the Query Interval field indicates
how often IGMP Host-Query frames are transmitted on the VLAN
selected in the VLAN ID field. This value is also used in calculations for
other timers. The default value is 125 seconds. The range of possible
entries is 1 to 300 seconds. An entry outside of the range will cause the
error message “PERMISSIBLE RANGE: 1...300” to display in the Event
Message field.
Configuration Statistics
------------------- ------------
IGMP Version: [ 2 ] Querier Address: 0.0.0.0
Query Interval: 120 Querier Uptime: 0 D 0 H 0 M
Query Response Time: 10 Querier Expire Time: 24500 S
Interface Robustness: 2
Last Member Query Interval: 10
VLAN ID: [ 1]
IGMP State: [ DISABLED ]
Default for new VLANS: [ DISABLED ]
SAVE EXIT RETURN
3026_201