Filter
Top Products
802.1 Configuration Menu Screen
Local Management Supplement 1-39
802.1Q VLAN CONFIGURATION MENU
Displays only if the SmartSwitch has been configured to operate as an
IEEE 802.1Q switch. When selected, this menu item opens the 802.1Q
VLAN Configuration Menu screen.
The IGMP/VLAN Configuration screen has been added to the 802.1Q
VLAN Configuration Menu screen. The revised menu screen is shown in
this supplement along with a description of how to use the IGMP/VLAN
Configuration screen. Refer to Section 1.19 for details.
For details about the other VLAN Local Management screens and how to
use them to configure VLANs in the SmartSwitch, refer to the Cabletron
Systems 802.1Q VLAN User’s Guide.
GARP OPERATION STATUS
Used to enable/disable GVRP and GMRP on the switch and set each port
to operate as a GVRP- or GMRP-aware port so it can send/receive frames
from other GVRP- or GMRP-aware devices. GVRP and GMRP enables
the switch to dynamically create VLANs and Multicast Registration
across a switched network. For more information about GVRP and
GMRP, refer to Section 4.1.
For details about the GARP Configuration screen, refer to Section 4.3.
GMRP GROUP REGISTRATIONS
Used to select individual ports or all of the ports and apply one of four
modes of operation according to, or regardless of, multicast address
registration. For more information about GVRP and GMRP, refer to
Section 4.1.
For details about the GMRP Group Registrations/GMRP Configuration
screen, refer to Section 4.1.
802.1p PRIORITY CONFIGURATION
Used to select the Priority/Multicast Configuration Menu screen, which in
turn enables the selection of the Port Priority Configuration and Advanced
Port Priority Configuration screens. For details, refer to Section 1.20.