Filter
Top Products
High Speed Interface Configuration Screen
Local Management Supplement 1-25
3. Use the arrow keys to highlight the SAVE command. Press ENTER.
The message “SAVED OK” displays and Local Management saves
the changes to memory. The selected mode is displayed in both the
Desired Operational Mode field and the Current Operational Mode
field.
1.9.5 Setting the FE-100TX Advertised Ability
In normal operation, an FE-100TX auto-negotiates to the highest speed
possible. Under some circumstances, the Network Administrator may
want the port to advertise only some of the available modes and not
advertise in other modes. This field steps to 10Base-T, 10Base-TFD (full
duplex), 100Base-TX, and 100Base-TXFD (full duplex). To set the
advertised ability, proceed as follows:
1. Use the arrow keys to highlight the Desired Oper. Mode field.
2. Use the SPACE bar to select the desired mode.
3. Use the LEFT-ARROW key to move back to the Advertised Ability
selection and use the SPACE bar to select the next mode to enable or
disable.
4. Use the RIGHT-ARROW key to move across to the
Enabled/Disabled field to the right of the selection.
5. Use the SPACE bar to select Enabled or Disabled. Press ENTER.
Continue this process until you have completed enabling or disabling
the advertised modes.
6. Use the arrow keys to highlight the SAVE command. Press ENTER.
The message “SAVED OK” displays and Local Management saves
the changes to memory.