Filter
Top Products
Flash Download Screen
6H122-08 User’s Guide 5-75
The following briefly explains each field of the Flash Download screen:
Download Method (Selectable)
This field steps through TFTP, RUNTIME and BOOTP. If set for
BOOTP, the module sends out a BootP request to determine the IP
address of the TFTP server and the filename of the image to be
downloaded. If set for TFTP or RUNTIME, the 6H122-08 attempts a
TFTP download based on the IP address and filename entered in the fields
at the bottom of the Flash Download screen. Section 5.22.1 describes how
to download using TFTP. Section 5.22.2 describes how to download using
RUNTIME. Section 5.22.3 describes how to download using BootP.
Reboot After Download (Modifiable when RUNTIME is chosen only)
This field notifies the user that the 6H122-08 will reboot after the
download is complete. If a RUNTIME Download is performed, this field
toggles between YES and NO. If YES is selected, the module reboots
after the download is completed. If NO is selected the module continues
using the existing the firmware image. The module stores the new
firmware image in FLASH memory. When the module or 6C105 chassis
is reset, the module will boot from FLASH memory using the new image.
TFTP Gateway IP Addr (Selectable)
This field shows the IP address of the TFTP gateway server defined in the
General Configuration screen in Section 5.15.4.
Last Image Server IP (Read-only)
This field shows the IP address of the server used for the previous FLASH
Download.
Last Image File Name (Read-only)
This field shows the complete path and file name of the last image
downloaded to FLASH.
NOTE
Download Server IP and Download Server Filename are
displayed only when TFTP or RUNTIME are selected in
Download Method.