Filter
Top Products
Summary of Features
1-4 Introducing RoamAbout Access Point
4 Wired LAN
Activity
LED
Indicates the status of the wired Ethernet segment. The
LED lights (green) when packets are:
• Received on the Ethernet port and forwarded to the
wireless port.
• Addressed to or generated by the AP using the
Ethernet port.
Packets received and filtered are not shown. Data
traffic forwarded to the Ethernet port is not shown.
The average brightness of the LED indicates the level
of activity on the Ethernet port. If the LED is flashing
together with the Bridge State LED (6), the Ethernet
port has a fault that prevents the AP from establishing
a connection to the network.
510BaseT
Ethernet
Connector
Connects the AP to a 10BaseT network. This
connector is not used if the AP is connected to a
ThinWire network or installed in a MultiSwitch 900 or
DEChub 90.
6 Bridge State
LED
Lights (green) when the AP is forwarding packets.
7 Access Point
Saturated
LED
Lights (yellow) when the AP is saturated. Saturation
occurs when the AP cannot forward packets from the
Ethernet to the wireless side due to the lower
throughput of the wireless network. The degree of
LED brightness indicates the level of saturation. The
LED dims (and eventually extinguishes) as the
network congestion is processed.
8 Wireless LAN
Activity
LED
Indicates the status of the wireless Ethernet segment.
The LED lights (green) when packets are:
• Received on the wireless port and forwarded to the
Ethernet port.
• Addressed to or generated by the AP using the
wireless port.
Packets received and filtered are not shown. Data
traffic forwarded to the wireless port is not shown. The
average brightness of the LED indicates the level of
activity on the wireless port. If the LED is flashing
together with the Bridge State LED (6), the wireless
port has a fault that prevents the AP from establishing
a connection to the network.
Item Name Description