Filter
Top Products
Installing the RoamAbout Access Point 3-9
Installing the AP
6 Connect the AP’s power supply cable to the power connector on the
back panel of the AP.
If using an outdoor antenna, make sure that the AP and the outdoor
antenna use the same grounding system, as described in the RoamAbout
802.11 Outdoor Antenna Installation Guide.
7 Connect the power supply to an AC outlet to turn on the AP.
8 Go to “Verifying the Operation of the RoamAbout Access Point” on
page 3-10.
Step Action
LKG-8673-931-01