Filter
Top Products
Introducing RoamAbout Access Point 1-5
Summary of Features
9 PC Card
Present
LED
Lights (green) when the PC Card is correctly installed
at power-up.
10 Local Console
Port
Used to configure the AP.
11 PC Card Slot Used for the PC Card.
12 Ethernet
Hardware
Address
Unique physical address of the AP.
13 Reset Button Forces a downline load of the AP’s firmware from a
load host and resets the AP to its factory default
settings.
14 Back Cover Present on standalone APs only. Covers the backplane
connector and mounting assembly.
15 Locking Tab Locks the AP into a MultiSwitch 900 or DEChub 90.
16 48-Pin
Backplane
Connector
Provides network and power connections to the AP
when installed in a MultiSwitch 900 or DEChub 90.
17 Power Supply
Connector
Receives +5 Vdc from the AP’s standalone power
supply. Not used when the AP is installed in a
MultiSwitch 900 or DEChub 90.
18 Mounting Tab Secures the AP to the MultiSwitch 900 or DEChub 90
backplane.
Item Name Description