Filter
Top Products
Installing the RoamAbout Access Point 3-7
Installing the AP
4 To configure the AP, you need the RoamAbout Access Point Manager
(see “Installing the RoamAbout Access Point Manager” on page 3-15)
or a console device.
To use a console device, connect a 9-pin serial cable to the AP’s 9-pin,
D-Sub, PC-compatible serial port.
Note: The pinouts for the AP’s local console connector are listed in
Appendix A.
Step Action
1
2
R
o
a
m
A
b
o
u
t
LKG-8804-931-01
Access Point