Filter
Top Products
2-10 SmartCell 6A000 User Guide
Usin
g
the Console Switch Installation and Setup
As with the show command, each prompt provides you with a default. For example
SmartCell ZX # add laneclient
ClientNumber(3) :
accept the default
LanName(ELAN003) : My-elan
call the ELAN something other than the default name
ServerType(LECS) :
ServerAddress() : 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:d4:14:41:80:01
IPAddress() : 122.44.212.17
NetMask(255.0.0.0) : 255.255.255.0
MTU(1516) :
SmartCell ZX #
In the example above, some values are specified by taking the default, while others are explicitly entered.
Press the Esc key to back out of any command before you enter the last value.
2.5.2 Console Help
The console provides several levels of help for console commands. For example, to list the switch-attributes that can
be used with a particular operator, enter the word
help (or ?) followed by the operator.
SmartCell ZX # help add
HELP ---- add
============================================================================
add [ AlarmConf | BUSELAN | Community | ELAN | IISPRoute |
IPATMClient | IPATMPVC | LANEClient | LECSAddress | LECSELAN |
LECSELANLEC | LECSTLVSET | LESELAN | PVC | Route |
TrafficDescriptor | TrapCommunity | UNIRoute | WellKnownAddress ]
SmartCell ZX #
To obtain an explanation of a command and its parameters, enter the word help (or ?) before the command.
SmartCell ZX # ? add laneclient
Create LANE Client
============================================================================
ClientNumber Local Client Number (0-127)
LanName Name of the ELAN to join
ServerType Type of LANE Server [LECS, LES]
ServerAddress ATM Address of the LANE Server
IPAddress IP Address of the Client
NetMask IP Netmask of the Client
MTU MTU for the Client [1516, 9234, NONE]
SmartCell ZX #
While entering a command, you can obtain help about the current parameter by entering a question mark (?) at the
prompt. For example
SmartCell ZX # add uniroute
PortNumber(A1) :B3
UNIATMAddress() : ?
ATM Address for the UNI route. 20 bytes
UNIATMAddress() :39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:d4:14:41:80:00
SmartCell ZX #