Cabletron Systems SmartCell 6A000 Switch User Manual


 
SmartCell 6A000 User Guide 4-11
Switch Administration Lo
g
s and Alarms
To see the route, enter the show route command on SW2
SmartCell ZX # show route
ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
------------------------------------------------------------------------
0.0.0.0 0.0.0.0 1 0 0 zn0
90.1.1.0 90.1.1.33 1 0 1688 zn1
128.205.99.0 90.1.1.254 1 3 5660 zn1
------------------------------------------------------------------------
ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
------------------------------------------------------------------------
127.0.0.1 127.0.0.1 5 0 0 lo0
------------------------------------------------------------------------
SmartCell ZX #
Fi
g
ure 4-3 IP routin
g
throu
g
h SW1 for connectivit
y
to the Ethernet network
4.4 LOGS AND ALARMS
This section discusses the log and alarm features, concepts, and the commands provided by the SmartCell 6A000
switch for setting and using the log and alarm options.
NMS
Ethernet network 128.205.99.0
SW1
SW2
IISP Route
ELAN
Switch client
on SW2, 90.1.1.33
Switch client
on SW1,
IP Route
Ethernet interface
90.1.1.254
128.205.99.254
Switch client on SW1 is
defined as SW2’s
g
atewa
y
to the Ethernet