Filter
Top Products
47
An Error Message is Displayed While Using the Photo
Viewer
If one of the following messages appears while using the Photo Viewer, printing may be disabled
or the Photo Viewer may be forced to terminate.
Error Message Try This
Executing maintenance. Printing cannot be done in the maintenance mode.
Insert a memory card. Insert a memory card after checking its orientation.
See “Using a Memory Card” on page 7.
If a memory card has already been inserted, remove it and then insert it again. Next,
check that the Indicator lamp stays on.
The printer’s card slot has been
write-enabled. ......
The memory card utility started on the computer has write-enabled the card slot.
When the card slot is write-enabled, the printer cannot print images.
When you have finished writing data to the card, cancel the write-enable mode. For
the cancellation procedure, see “Setting up the Card Slot as the Memory Card Drive
of the Computer” on page 31.
There is a problem with the
memory card or it is not inserted.
......
• The memory card is inserted incorrectly.
Insert the memory card after checking its orientation. See “Using a Memory Card”
on page 7.
If a memory card has already been inserted, remove it and then insert it again.
Next, check that the Indicator lamp stays on.
• The memory card cannot be read.
Image data edited/processed on the computer must also be printed from the
computer.
Insufficient disk space. ...... The hard disk of the computer does not have a sufficient free space.
Delete unnecessary files on the hard disk to create sufficient free space, then start
the Photo Viewer again.
Insufficient memory. ...... The computer does not have sufficient free memory. Close some applications or
increase memory, then start the Photo Viewer again.
A digital camera is connected to
the printer. ......
Printing from a computer or the operation panel cannot be done when a digital
camera or digital video camcorder is connected to the printer.
After completion of operation from the digital camera, disconnect the connection
cable.
Failed to communicate with the
printer. ......
The computer cannot communicate with the printer.
Check whether the cable is connected securely between the printer and computer.
Turn the printer off and on again, then start the Photo Viewer again.
Failed to print. ...... An unexpected error occurred during printing.
Turn the printer off and on again.
An internal error (code = nnnn)
occurred. ......
(n: Alphanumeric character)
An internal error occurred.
Turn the printer off and on again, then start the Photo Viewer again.
If the same error persists, reboot the computer and then start the Photo Viewer
again.