Filter
Top Products
32
1 Ensure that the printer and the computer are turned on.
2 Start the BJ Utility.
(1) Ensure that no memory card is inserted in the card slot. If a memory card is
inserted in the card slot, remove it. See “Removing a Memory Card” on page 9.
(2) Select Applications
ApplicationsApplications
Applications from the Go
GoGo
Go menu, and then double-click the BJ Utility
BJ UtilityBJ Utility
BJ Utility icon.
3 Specify the read/write attribute.
Changing the Language Displayed
You can change the language displayed on the LCD.
1 Turn on the printer.
2 Select Maintenance
MaintenanceMaintenance
Maintenance from the Menu
MenuMenu
Menu.
(1) Press the Menu
MenuMenu
Menu button.
(
1
)S
pec
if
y t
h
e rea
d/
wr
i
te attr
ib
ute.
Read-only mode
Read-only modeRead-only mode
Read-only mode
... The card slot is used only for read.
Be sure to select this mode when printing
images.
Read/write mode
Read/write modeRead/write mode
Read/write mode
... The card slot is used as the memory card
drive of the computer. Image data can be
written into the memory card.
(2) Click OK
OKOK
OK.
The selected read/write attribute is saved.
(2) Use the buttons to select Maintenance
MaintenanceMaintenance
Maintenance
and then press the OK
OKOK
OK button.
The maintenance menu is displayed.