Filter
Top Products
Printing Maintenance
36
3 Start Print Head Deep Cleaning.
Print Head deep cleaning starts when the PPOWER lamp starts blinking.
Do not perform any other operations until the Print Head deep cleaning is
completed (about one minute).
Note
After Print Head deep cleaning finishes, print the nozzle check pattern to
verify that the Print Head Nozzles are clean.
See "PPrinting the Nozzle Check Pattern" on page 27.
If not, check that there are sufficient ink levels in all ink tanks before
turning off the printer. Be sure to perform another Print Head deep
cleaning 24 hours after turning off the printer.
If this does not resolve the problem, the Print Head may be worn out.
Contact the Customer Care Center.
(1) Select CCleaning from the
pop-up menu.
(2) Click DDeep Cleaning.
(3) Click OK.
iP1500_QSG_US.book Page 36 Tuesday, April 27, 2004 5:26 PM