Filter
Top Products
19
2
Installing the Software
The following software applications are provided on the setup disc that is
packaged with the scanner. Be sure to open and read the Readme.txt file on the
setup disc before installing the software.
● Scanning Utility
This utility software is a dedicated software application for the CR-180II.
A dedicated scanner driver is installed after you install the utility software.
● ISIS/TWAIN driver
This scanner driver should be used with ISIS (Image and Scanner Interface
Specification) compatible or TWAIN (Technology Without Any Interested Name)
compatible software. Install it, only if it is required.
●The Scanning Utility includes a device driver so that Windows can recognize the
CR-180II. Be sure to install the Scanning Utility before connecting the CR-180II to
the computer.
●The ISIS/TWAIN driver provided with the scanner does not necessarily operate all
ISIS compatible or TWAIN compatible applications. Contact your software dealer or
service representative for further information.
●Some functions mentioned in this manual may not be operated in some applications.
Installing the Scanning Utility
Follow the instructions below to install the Scanning Utility and the dedicated
driver.
The dedicated scanner driver is installed after the Scanning Utility has been installed.
1
Turn ON your computer, and log on to Windows.
Be sure to log on as the Administrator.
Important
Note
Important
2.3 Installing the Software