Canon CR-180II All in One Printer User Manual


 
69
Specifications
Scanner Specifications
Type Desktop sheet feed
Document size Hight: 2.4" to 4.6" (60 to 118 mm)
Length: 4.7" to 9.1" (120 to 230 mm)
Thickness: 0.003" to 0.008" (0.08 to 0.20 mm)
Weight: 17 to 40 lb bond (64 to 157 g/m
2
)
Document feeding Automatic / Not separate
Scanning method Contact image sensor (CMOS)
Light source Three color (RGB) LED and 1 white line LED array
Scanning side Simplex/duplex
Scanning mode Black-and-white, advanced text enhancement, error diffusion,
256 level grayscale
Scanning resolution 240 x 240 dpi, 200 x 200 dpi, 150 x 150 dpi, 120 x 120 dpi, and
100 x 100 dpi
Scanning speed 180 ppm (American checks)
Automatic feeder Load limit of less than 0.8" (20 mm) (within the load limit mark)
capacity
Automatic document Up to 200 sheets (16 to 32 lb bond/60 to 120 g/m
2
)
feed capacity
Interface SCSI III/Hi-Speed USB 2.0
Other functions Automatic paper size detection, Paper thickness and double
feed detection, Dropout color, Emboss enhancement, Deskew,
Black border removal
Dimensions 10.7" (H) x 15.7" (W) x 9.5" (D)
(271 mm (H) x 399 mm (W) x 242 mm (D))
Weight Approximately 13.9 lb (6.3 kg)
Power requirement AC 120V (60 Hz) or AC 220-240V (50/60 Hz)
Power consumption 120 V model 220-240 V model
Scanning: 0.6A maximum 0.5A maximum
Standby: Under 0.2A Under 0.14A
Low-power mode: Under 6.6W Under 9.6W
Noise Less than 70 dB
Operating environment
Temperature: 50°F to 90.5°F (10°C to 32.5°C)
Humidity: 20% to 80% RH
Use the recommended operating environment for the ink cartridge when using
the imprinter.
You can use the functions noted above if your software supports them.
These functioins may not work depending on your computer’s capabilities and
the software you are using.
Specifications are subject to change without notice.
(primary scan lines x
secondary scan lines)