Filter
Top Products
27
2
2.5 Turning ON and OFF the Power
Note
3
Windows recognizes the CR-180II as new hardware, and installation
starts automatically.
●The installation finished message is not displayed in Windows 2000.
●If your operating system is Windows XP, a message appears after the device driver is
installed.
●The CR-180II will be registered as “CANON CR-180 SCSI” or “CANON CR-180 USB”
in the Imaging Device directory.
The displayed device name of the CR-180II differs depending on the connection, via
SCSI or USB. Turn OFF the power to the scanner and the computer before changing
the connections, and then turn ON the power, and let the computer recognize the
scanner again.
(Windows 2000)
(Windows XP)