Filter
Top Products
44
Chapter 4 Document Feeding and Scanning
●When Using the Accompanying Scanning Utility for CR-180II:
Scanning is suspended and a message is displayed when the eject pocket
becomes full of documents. Scanning resumes when the documents are
removed from the eject pocket (Eject pocket full detection).
●If you start scanning and the message shown above appears when there are no
documents in the eject pocket, pull the document brace all the way forward and
then return it to cancel the message and then try scanning again. (See “Turning
on the Power” on p. 26)
Manual Feeding (Bypass Mode)
Use the Bypass (manual) mode to scan duplicate forms which have sticky edges
or documents that have a rough surface. Feed these documents one by one and
press Bypass Mode button.
For duplicate forms, load the side with the sticky edges toward the feeding entry point.
Bypass Mode Button
Important
Document Brace
Note