Filter
Top Products
28 Sending Faxes
Special Dialing
Sending a Document Using Caller History
If the <CALLER ID> setting is set to <ON>, the caller’s name and phone/fax number appear on
the LCD when you receive a call (see page 48). The fax keeps up to 20 latest caller IDs in
memory.
1 Press [Caller History], then wait for 2 seconds or press any button.
The numbers, names, and date and time from which you have received calls recently will be
displayed on the LCD.
z Press [Redial] or [Caller History] to switch between the date and time, name, and phone/fax
number on the LCD.
2 Use [{] or [}] to select the receiving party, then press [Start/Copy].
The fax begins calling the number.
Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc. require tone
dialing for their services. If your machine is connected to a rotary pulse line, you can set the
machine to temporarily switch to tone dialing.
1 Press [Hook] or lift the Handset.
2 Use the numeric buttons to dial the number of the information service.
3 When the recorded message of the information service answers, press [Tone] ([ ])
to switch to tone dialing.
If you pressed [Hook] in step 1 and wish to talk to the other party, lift the Handset.
4 Use the numeric buttons to enter the numbers requested by the information
service.
5 When you have finished using the service, press [Hook] or hang up the Handset.
Long-Distance Dialing
When you register a long-distance number, you may have to insert a pause within or after the
number. For long-distance dialing, the location and length of the pause may differ depending on
the telephone system. To enter a pause, press [Pause]. The length of this pause can be
adjusted. See <PAUSE TIME> on page 46. A pause at the end of a number is fixed at 10
seconds.
Note
The caller history feature uses the Telcordia or the ETSI EN 300 778-1 protocol. Contact your local
telephone company for detailed information.
01: 3456XXXX
]
CANON 01/25/2009 13:30
]