Canon LBP2900 Printer User Manual


 
Installing the CAPT Software
3-4
Setting Up the Printing Environment
3
Installing the CAPT Software
This section describes the procedure for installing the CAPT software on a
computer that is connected directly to the printer using a USB cable.
For Windows 98/Me (See p. 3-4)
For Windows 2000 (See p. 3-19)
For Windows XP/Server 2003 (See p. 3-31)
IMPORTANT
The CAPT software is required for printing using this printer. Make sure that you install it.
If there is not enough free space remaining on the hard disk, the message appears
during the installation. Abort the installation and create more space on the disk before
beginning the installation again.
NOTE
For details on the procedure for installing this software when the printer is shared on the
network from one computer and you are printing from another computer over the
network, see "Printing from a Network Computer using a Shared Printer," on p. 3-47.
A USB cable is supplied with this printer only within countries and regions of Asia. In
other countries and regions, prepare according to the specifications of your computer.
For Windows 98/Me
The screen shots used in this section are from Windows Me.
Installing from CD-ROM Setup
1
Make sure that the computer and printer are turned off at the
power.