Filter
Top Products
Introduction
3-3
Setting Up the Printing Environment
3
System Requirements
In order to use the printer driver, your computer system needs to meet the following
requirements:
■ Operating System
• Microsoft Windows 98
• Microsoft Windows Me
• Microsoft Windows 2000 Server/Professional
• Microsoft Windows XP Professional/Home Edition
• Microsoft Windows Server 2003 (32-bit processor version only)
- Operating Environment
* As the actual amount of memory that is available for use differs depending on the configuration of your
computer system and the application you are using, printing cannot be guaranteed in all cases in the above
environments.
- Recommended Environment
■ Interface
• USB: USB 2.0 High-Speed (Windows 2000/XP/Server 2003 only), USB Full-Speed
(USB 1.1 equivalent)
NOTE
•
If you want to use the sounds from the printer driver, a PC synthesizer (and the PCM
synthesizer driver) needs to be installed in your computer. Do not use the PC speaker
driver (speaker.drv).
•
This printer uses bidirectional communication. Operation of the printer when connected
via unidirectional communication equipment has not been tested. As a result, Canon
cannot guarantee printer operation when the printer is connected using unidirectional
print servers, USB hubs and switching devices.
Windows 98/Me Windows 2000/XP/Server 2003
CPU
Pentium II
300MHz or higher
Pentium II
300MHz or higher
Memory (RAM)* 64MB or more 128MB or more
Hard Disk
30MB or more Windows 2000: 60MB or more
Windows XP/Server 2003: 70MB or more
(PC/AT compatibles)
Windows 98/Me Windows 2000/XP/Server 2003
CPU
Pentium III
600MHz or higher
Pentium III
600MHz or higher
Memory (RAM) 128MB or more 256MB or more