Filter
Top Products
23
COMPUTER INPUT
SELECTING THE COMPUTER SYSTEM
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA (refer to the
“COMPATIBLE COMPUTER SPECIFICATIONS” on page 24). When selecting Computer, this projector automatically tunes
to the incoming signal and projects a proper image without any special setting. (Some computers need to be set manually.)
The projector displays one of the Auto, - - -, Mode 1/2/3/4/5, or the system provided in the projector.
When the projector cannot recognize the connected
signal, the Auto PC Adjustment function adjusts the
projector, and the message “Auto” is displayed on the
SYSTEM Menu icon. (Refer to page 25.) When the
image is not provided properly, adjust the parameters
manually. (Refer to page 26, 27.)
There is no signal input from the connected computer.
Make sure the connection between the computer and the
projector is set correctly.
(Refer to the “TROUBLESHOOTING” on page 42.)
Auto
– – –
The SYSTEM Menu icon
displays the system being
selected.
PC SYSTEM MENU
SELECT COMPUTER SYSTEM MANUALLY
SYSTEM Menu icon
Displays the system being
selected.
The systems on this dialog box
can be selected.
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to move the red
frame pointer to the PC SYSTEM Menu icon.
Press the POINT DOWN button to move the red arrow pointer to
the system that you want to set, and then press the
SET button.
1
2
PC SYSTEM MENU
Custom Mode (1~5) set in the
PC ADJUST Menu. (P26, 27)
This projector automatically selects the PC system among those
provided in this projector and the PC system can also be selected
manually.
User preset adjustment in the “MANUAL PC
ADJUSTMENT.” Adjustment data can be stored in the
Mode 1 - 5.
Mode 1
Computer systems provided in the projector. The
projector chooses a proper system and displays it.
SVGA 1
*Mode 1 and SVGA 1 are examples.
NOTE
● The PC SYSTEM Menu cannot be selected when the input signal is
digital.