Canon LV-5200 Projector User Manual


 
9
PREPARATION
POSITIONING THE PROJECTOR
This projector is designed to project on a flat projection surface.
The projector can be focused from 3.6(1.1m) ~ 31.8(9.7m).
Refer to the figure below to adjust a screen size.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the
Adjustable Feet. Projection angle can be adjusted to approx. 16
degrees.
Lift the front of the projector and pull the Feet Lock Latches
on both sides of the projector.
1
ADJUSTABLE FEET
FEET LOCK
LATCHES
36
100
150
100
67
200
134
300
202
24
31.8 (9.7m)
21.1 (6.4m)
15.6 (4.8m)
10.4 (3.2m)
3.6 (1.1m)
Release the Feet Lock Latches to lock the Adjustable Feet
and rotate the Adjustable Feet to fine tune the position and
the tilt.
2
To retract the Adjustable Feet, lift the front of the projector
and pull the Feet Lock Latches and push to feet upward.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 36.)
3
ROOM LIGHT
The brightness of a room has a great impact on
picture quality. It is recommended to limit
ambient lighting to provide the best image.
Max. Zoom
Min. Zoom
CAUTION
Avoid positioning the projector with the angle of more than 20
degrees. The Projection Lamp may malfunction. Refer to page 8.
Screen Size
(W x H) mm
Zoom (min)
36
Zoom (max)
728 x 546
5.4
(1.7m)
3.6
(1.1m)
100
2032 x 1524
15.6
(4.8m)
10.4
(3.2m)
150
3048 x 2286
23.5
(7.2m)
15.6
(4.8m)
200
4064 x 3048
31.4
(9.6m)
21.1
(6.4m)
300
6096 x 4572
–––––
31.8
(9.7m)
24
490 x 367
3.6
(1.1m)
–––––
H1
H1 : H2 = 9 : 1
H2