Filter
Top Products
44
INDICATORS AND PROJECTOR CONDITION
Check the Indicators for the projector condition.
• • • on • • • dim • • • off• • • flashing
✽ When the life of the Projection Lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow,
replace the Projection Lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.
APPENDIX
The projector is OFF. (The AC Power Cord is unplugged.)
The projector is READY to be turned on with the POWER
ON-OFF button.
The projector is being cooled down. It cannot be turned on until
the READY indicator lights green.
Projector Condition
The projector is operating normally.
LAMP
REPLACE
yellow
Indicators
READY
green
LAMP
red
WARNING
TEMP.
red
The projector is in the Power management mode.
✽
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled
down enough and the temperature returns to normal, the
READY indicator lights green and the projector can be turned
on. (The WARNING TEMP. indicator keeps flashing.) Check
and clean the Air Filter.
The projector is cooled down enough and the temperature
returns to normal. When turning on the projector, the WARN-
ING TEMP. indicator stops flashing. Check and clean the Air
Filter.
The projector detects an abnormal condition and cannot be
turned on. Unplug the AC Power Cord and plug it again to turn
on the projector. If the projector is turned off again, disconnect
the AC Power Cord and contact the dealer or the service cen-
ter for service and checkup. Do not leave the projector on. It
may cause electric shock or fire hazard.
✽
✽
✽
✽
✽
✽