Filter
Top Products
43
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
APPENDIX
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If the problem still persists
after following all operating instructions,
contact the sales dealer where you purchased the
projector or the service center.
Give the model number and explain the problem in detail. We will advise you how to obtain
service.
Remote Control Unit
does not work.
● Check the batteries.
● Check ALL-OFF switch on the Remote Control Unit is set to “ON.”
● Make sure nothing is between the Infrared Remote Receiver and the Remote Control
Unit.
● Make sure you are not too far from the projector when using the Remote Control Unit.
Maximum operating range is 16.4’ (5m).
● Make sure the code of the Remote Control Unit is set to conform to the projector.
(See the “SETTING” section on page 37.)
Problem: Try these Solutions
Wireless Mouse
function does not
work.
● Check the cable connection between the projector and your computer.
● Check the mouse setting on your computer.
● Turn the projector on before turning on your computer.
The CE Mark is a Directive conformity mark of the European Community. (EC)