Filter
Top Products
22
Important!
• Do not operate the printer while it is standing up on its side. Also,
you should not store the printer standing on its side when you are
not using it.
• Note that you cannot load or remove a disc unless both the AC
adaptor and USB cable are connected to the printer.
Connecting for the First Time
• A USB driver installation Wizard starts up automatically the first
time you connect the printer to your computer after installing the
CD/DVD LABEL PRINTER application. Follow the instructions that
appear on the display to install the USB driver.
• If you are running Windows XP, the message shown below will
appear during USB driver installation. When it does, click Continue
Anyway to proceed with the installation.
• If you are running Windows 2000, the warning message “Digital
Signature Not Found” may appear during USB driver installation.
When it does, click Yes to proceed with the installation.
• The above messages do not appear on a system running Windows
98, 98SE, or ME.
To disconnect from a power source and a PC
1.
Unplug the USB cable from the PC and printer.
2.
Unplug the power cord from the wall outlet, and then unplug the AC
adaptor from the printer.
1
2
1
2
Important!
Never disconnect the AC adaptor, power cord, or USB cable while a
print operation is in progress. Doing so creates the risk of malfunc-
tion.