Filter
Top Products
79
Caring for the Printer
A dirty print head can make it impossible to obtain good printing results.
Perform the following steps to clean the print head when it becomes
dirty.
Important!
• Use only a cotton swab or some other soft material to clean the print
head.
• Note that you will not be able to open the disc tray or the front cover
unless the power cord, AC adaptor and USB cable are connected to
the printer. Open the front cover before disconnecting cables. See
page 23 for information about opening the disc tray and front cover,
and page 22 for information about disconnecting cables.
1.
Press the Eject button on the front of the printer or click the
button on the main window.
This causes the disc tray to come out part way.
2.
Gently pull out the disc tray as far as it will go.
If there is a disc in the disc tray, remove it.
3.
Open the front cover.
If there is an ink ribbon cassette loaded in the printer, remove it.
4.
Unplug the USB cable from the PC and printer.
5.
Unplug the power cord from the wall outlet, and then unplug the AC
adaptor from the printer.
6.
Use a cotton swab moistened with alcohol to clean the print head.
You can use a commercially available cassette tape recorder head
cleaning kit to clean the print head.
Cleaning the Printer Exterior
Wipe the exterior of the printer with a cloth moistened with plain
water. Wring all excess liquid from the cloth before wiping the printer.
Never use benzene, alcohol, thinner, or other volatile agents to clean
the printer exterior. Doing so can damage the case.
Insert the tip of the
cotton swab and slide it
lightly back and forth
along the depression in
the print head.