Filter
Top Products
75
Positioning the Disc on the Tray
Use the positioning guide to adjust the position of the disc on the
tray in the following cases.
• When the label of the disc already has logos or other markings
• When performing separate upper block and lower block
printings
When the label of the disc already has logos or other markings
Note that you cannot print over a logo. Position the disc so the logo
or other markings on the disc label are not inside the shaded area.
When performing separate upper block and lower block printings
Before performing the second printing, rotate the disc 180 de-
grees. Next, position the disc so the first printing is within the shaded
area.
Guidelines
Printing will be
performed inside
the area indicated
by the guidelines on
the disc tray.
Area of first
printing
Area of second
printing