Cisco Systems 612 Network Card User Manual


 
1-7
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
OL-9137-02
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
Front Panel Control Buttons
Figure 1-4 shows the WAE front panel, and Table 1-1 describes the front panel
control buttons.
Figure 1-4 Front Panel Control Buttons
LED Indicators
Figure 1-5 shows the location of front panel LEDs, and Table 1-2 describes
their function.
1 Power control button 2 Reset button
3 CD eject button
Ta ble 1-1 Front Panel Control Buttons
Item Description
Power control button Powers up the device. You might need to use a pen or the end of a
straightened paper clip to press the button.
Reset button Resets the device and runs the power-on self-test (POST). You might need
to use a pen or the end of a straightened paper clip to press the button.
Note This is a hardware reset button and does not restore the device to the
factory default software settings.
CD eject button Opens the CD drive tray.
151922
3
1 2