Filter
Top Products
Chapter 2 Preparing to Install the Cisco Wide Area Application Engine
Safety Guidelines
2-4
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
OL-9137-02
Warning
This product requires short-circuit (overcurrent) protection, to be provided as
part of the building installation. Install only in accordance with national and
local wiring regulations.
Statement 1045
Warning
Installation of the equipment must comply with local and national electrical
codes.
Statement 1074
Warning
Hazardous voltage or energy may be present on DC power terminals. Always
replace cover when terminals are not in service. Be sure uninsulated
conductors are not accessible when cover is in place.
Statement 1075
Safety Guidelines
To reduce the risk of bodily injury, electrical shock, fire, and damage to the
equipment, observe the precautions in this section.
General Precautions
Observe the following general precautions for using and working with your
system:
• Observe and follow service markings. Do not service any Cisco product
except as explained in your system documentation. Opening or removing
covers that are marked with the triangular symbol with a lightning bolt may
expose you to electrical shock. Components inside these compartments
should be serviced only by an authorized service technician.
• If any of the following conditions occur, unplug the product from the
electrical outlet and replace the part or contact your authorized service
provider:
–
The power cable or plug is damaged.
–
An object has fallen into the product.
–
The product has been exposed to water.