Filter
Top Products
30-35
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 30 Configuring the ASA CX Module
Feature History for the ASA CX Module
Multiple context mode support for the ASA
CX module
ASA 9.1(3)
ASA CX 9.2(1)
You can now configure ASA CX service policies per
context on the ASA.
Note Although you can configure per context ASA
service policies, the ASA CX module itself
(configured in PRSM) is a single context mode
device; the context-specific traffic coming from the
ASA is checked against the common ASA CX
policy.
We did not modify any commands.
Filtering packets captured on the ASA CX
backplane
ASA 9.1(3)
ASA CX 9.2(1)
You can now filter packets captured on the ASA CX
backplane using the match or access-list keyword with the
capture interface asa_dataplane command.
Control traffic specific to the ASA CX module is not
affected by the access-list or match filtering; the ASA
captures all control traffic.
In multiple context mode, configure the packet capture per
context. Note that all control traffic in multiple context
mode goes only to the system execution space. Because
control traffic cannot be filtered using an access-list or
match, these options are not available in the system
execution space.
We modified the following command: capture interface
asa_dataplane.
Table 30-2 Feature History for the ASA CX Module (continued)
Feature Name
Platform
Releases Feature Information