Filter
Top Products
3-3
Cisco Carrier Sensitive Routing User Guide
Chapter3 Cisco Carrier Sensitive Routing Application Operations
Deactivating CSR
Deactivating CSR
To stop CSR, log in to the CSR GUI by performing the following steps:
Step 1 At the system prompt, enter the following command:
/usr/local/csr/gui/csrgui &
The login dialog box in Figure3-1‘Login Dialog Box” appears.
Figure3-1 Login Dialog Box
Step 2 Enter the information on the Login screen as follows:
a. Enter the user name. The range is 1 to 32 characters.
b. Enter the password. The range is 1 to 32 characters.
c. Enter the host name that is the location of the database. This can be a remote or local host. The range
is 1 to 32 characters.
d. Enter port number. This is the port on the system for the database connection. The range is 1 to
32767.
e. Enter DB Name. This is the name of the database to be connected to. The range is 1 to 32 characters.
f. Click Login.
If login is successful, the CSR window in Figure3-2 “CSR Window” appears. Otherwise, a login
failure message appears and the Login dialog box reappears. The user is limited to three login
attempts, then the GUI shuts down. See Chapter4, “CSR GUI Functionalities”.