Filter
Top Products
4-25
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
Updating Active Datasets
Step 3 From the list, select an Egress Route Attribute by double-clicking on that attribute. Egress Route
Attributes information similar to the following appears (Figure4-27 “Dialog Box for an Existing Egress
Route Attribute in Active Dataset”):
Figure4-27 Dialog Box for an Existing Egress Route Attribute in Active Dataset
Step 4 Change the information accordingly.
Step 5 Click Modify to save the changes, or click Cancel to cancel the changes.
Deleting Egress Route Attributes
Step 1 In the Active Dataset tab screen in the CSR window, click the down arrow in the Selection box, then
select Egress Route Attributes from the pull-down menu.
Step 2 Click the down arrow in the Carriers box, then select the appropriate carrier from the pull-down menu.
Step 3 In the Egress Route Attribute list, select an attribute. You can select more than one attribute by holding
down the Ctrl key while clicking each attribute.