4-9
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
Configuring CSR with the GUI
Modifying Gatekeepers
This section describes how to modify an existing gatekeeper.
Step 1 Select a gatekeeper from the gatekeeper list in the Current Gatekeepers area, as follows (Figure4-11
“Current Gatekeepers Area in CSR Window”).
Figure4-11 Current Gatekeepers Area in CSR Window
Step 2 Click Modify. The following dialog box appears (Figure4-12 “Registered Messages and Filters Dialog
Box for an Existing Gatekeeper”).