Filter
Top Products
4-14
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
Updating Active Datasets
Creating Carriers
Note At least one contact list must be created before a carrier can be created. There must be a
single carrier of “Home” type created for the provisioned data. See the “Deleting Contact
Lists” section on page4-21.
Step 1 In the Active Dataset screen in the CSR window, if Carriers is not selected in the Selection box, click
the down arrow in that box. A pull-down menu appears (Figure4-17 “Carrier Selection Box in Active
Dataset”):
Figure4-17 Carrier Selection Box in Active Dataset
Step 2 Select Carriers from the pull-down menu, then click New. The New Carrier dialog box appears
(Figure4-18 “Dialog Box for New Carrier in Active Dataset”):