Filter
Top Products
4-32
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
Updating Active Datasets
Creating, Modifying, and Deleting Routes
This section describes the steps to create, modify, and delete routes.
Creating Routes
Step 1 In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Match Patterns from the pull-down menu.
Step 2 Click New. The New Route dialog box appears (Figure4-32 “Dialog Box for New Route in Active
Dataset”):
Figure4-32 Dialog Box for New Route in Active Dataset
The key shown on the screen is the primary key of this route in the Route table. When a new route is
being created, “%%%%” is displayed.
Step 3 In the Name box, enter the name of the route. The range is 1 to 64 characters. This entry is optional.
Step 4 In the Rule box, click the down arrow, then select from the pull-down menu a rule that applies to the
patterns to be used.
Step 5 Click QoS Relationships. The QoS Relationships dialog box appears (Figure4-33 “QoS Relationships
Dialog Box in Active Dataset”).