Filter
Top Products
4-42
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
CSR Commands
Sending Test Route Request Commands to an Active CSR Application
Step 1 Click the CSR Commands tab in the CSR window. The following screen appears (CSR Commands Tab
in CSR Window, page 4-42):
Figure4-39 CSR Commands Tab in CSR Window
Step 2 In the ANI box, enter the origination pattern.
Step 3 In the DNIS box, enter the pattern dialed.
Step 4 In the Source Carrier Id box, enter the ingress carrier to be used for testing.
Step 5 In the Destination Carrier Id box, enter the test egress carrier.