Filter
Top Products
1-12
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
OL-4234-06
Chapter 1 Overview of Cisco IAD2430 Series IADs
Interfaces and Service Capabilities
Ta b l e 1-1 Cisco IAD2430 Series Interfaces and Service Capabilities
Port Interface Configurations Interface To Services Supported Details
Console
port 0/0
EIA/TIA-232 asynchronous
serial (DCE)
ASCII terminal
Personal computer
Local administrative
access
RJ-45 physical interface
Note The serial port on the
Cisco IAD2435 acts
as either console or
auxiliary.
Auxiliary
port 0/1
EIA/TIA-232 asynchronous
serial (DTE)
Modem Remote administrative
access
Data backup
RJ-45 physical interface
Note The serial port on the
Cisco IAD2435 acts
as either console or
auxiliary.
Fast Ethernet
ports 0/0, 0/1
10/100BASE-T (802.3) LAN Data RJ-45 physical interface
RJ-21—8,
16, or 24
analog FXS
voice ports
Ports 2/0 to
2/23
Ports 0 to 7
(IAD2435
only)
FXS (loop-start or
ground-start)
Analog phone, fax,
or modem
Network side of key
system
Network side of
analog PBX
Analog voice/fax or
modem
Provides battery
RJ-21 physical interface
8-port FXS, on premise only
16-port FXS, on premise only
24-port FXS, on premise only
T1/E1 trunk
ports 0,1
Channelized T1/E1 WA N
Carrier network
Service types:
• ATM
• Cisco HDLC
1
• PPP
Transport types:
• TDM
2
trunk
• Leased lines
1. HDLC = High-Level Data Link Control
2. TDM = time-division multiplexing
Built-in CSU/DSU
3
T1.403-compliant
RJ-48C/CA81A physical
interface
Supports as many as 24 DS0s
3. CSU/DSU = channel service unit/data service unit
WIC/VIC
slot
S0 (serial)
HDLC-based data WA N
Carrier network
User equipment
Cisco HDLC
PPP
VoIP over PPP
Physical interfaces:
• EIA/TIA-232
• EIA/TIA-530/530A
• EIA/TIA-449
• V. 3 5
• X.21
CF
4
Slot 0
4. CF = Flash memory
Flash memory Flash memory card