Filter
Top Products
CHAPTER
3-1
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
OL-4234-06
3
Installing Cisco IAD2430 Series IADs
This chapter contains the procedures for installing your Cisco IAD2430 series integrated access device
(IAD) and consists of the following sections:
• Safety Recommendations, page 3-2
• Site Log, page 3-3
• Keeping Track—Checklist, page 3-3
• Mounting Tools and Equipment, page 3-4
• Unpacking and Inspection, page 3-5
• Rack-Mounting the Chassis, page 3-6
• Wall-Mounting the Chassis, page 3-9
• Desktop-Mounting the Chassis, page 3-14
• Installing the Ground Connection, page 3-14
• Installing a WAN or Voice Card, page 3-17
• Connecting Cables, page 3-18
• Ports, Connectors, and Pinouts, page 3-31
• Remote Terminal Connections (If Applicable), page 3-31
• Connecting Backup Power, page 3-33
Tip While you perform this installation, record your progress and site information. See the suggested format
in the “Keeping Track—Checklist” section on page 3-3.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Read the installation instructions before connecting the system to the power source.
Statement 1004