Filter
Top Products
C-3
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Appendix C Configuring the Switch with the CLI-Based Setup Program
Accessing the CLI Through the Console Port
Figure C-2 Connecting the Console Cable
Step 3 Configure the baud rate and character format of the PC or terminal to match the console port
characteristics:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• None (flow control)
Step 4 Connect power to the switch as described in Connecting to Power, page 2-13.
Step 5 The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow
the steps in the “Completing the Setup Program” section on page C-8.
1 RJ-45 console port 2 Console cable (RJ-45-to-DB-9 adapter cable)
16TC
±12/24/48
0.5-3.0A
1
331563