Filter
Top Products
B-3
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Appendix B Cable and Connectors
Connector Specifications
The USB console port uses a USB Type A to 5-pin mini-Type B cable, shown in Figure B-5. The USB
Type A-to-USB mini-Type B cable is not supplied. You can order an accessory kit (part
number 800-33434) that contains this cable.
Figure B-5 USB Type A-to-USB 5-Pin Mini-Type B Cable
The RJ-45 console port uses an 8-pin RJ-45 connector (See Table B-3 and Table B-4.) The supplied
RJ-45-to-DB-9 adapter cable is used to connect the console port of the switch to a console PC. You need
to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a
terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter. For console port
and adapter pinout information, see Table B-3 and Table B-4.
Alarm Port
For information on alarm ratings, see the “Alarm Ratings” section on page A-6.
The labels for the alarm connector pin-outs are on the switch panel and are displayed in Table B-1.
253405
Table B-1 Alarm Connector Labels (Top to Bottom)
Label Connection
NO Alarm Output Normally Open (NO) connection
COM Alarm Output Common connection
NC Alarm Output Normally Closed (NC) connection
IN2 Alarm Input 2
REF Alarm Input Reference Ground connection
IN1 Alarm Input 1