Filter
Top Products
C-4
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Appendix C Configuring the Switch with the CLI-Based Setup Program
Accessing the CLI Through the Console Port
USB Mini-Type B Console Port
Step 1 If you are connecting the switch USB-mini console port to a Windows-based PC for the first time, install
a USB driver. See Figure C-3 and the following sections for more information.
• “Installing the Cisco Microsoft Windows XP USB Driver” section on page C-5
• “Installing the Cisco Microsoft Windows 2000 USB Driver” section on page C-6
• “Installing the Cisco Microsoft Windows Vista and Windows 7 USB Driver” section on page C-6
Figure C-3 Connecting the USB-Mini Console Cable
Step 2 Connect an USB cable to the PC USB port. Connect the other end of the cable to the switch mini-B
(5-pin-connector) USB-mini console port. See Figure C-3.
Step 3 Identify the COM port assigned to the USB-mini console port:
1 USB-mini console port 3 USB port on the PC
2 USB cable
16TC
±12/24/48
0.5-3.0A
3
2
2
1
1
331554