2-34
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Chapter 2 Switch Installation
Connecting Alarm Circuits
Figure 2-20 Releasing the Spring-Loaded Latch from the DIN Rail
Step 4
Remove the switch from the DIN rail.
Connecting Alarm Circuits
After the switch is installed, you are ready to connect the DC power and alarm connections.
• Wiring the Protective Ground and DC Power for Alarm Circuits, page 2-34
• Wiring the External Alarms, page 2-35
Wiring the Protective Ground and DC Power for Alarm Circuits
For instructions on grounding the switch and connecting the DC power, see the “Grounding the Switch”
section on page 2-14.
1 Push latch down
331953
1