1-5
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Chapter 1 Product Overview
Front Panel
Front Panel
This section describes the front panel components. See Table 1-1.
• 10/100BASE-T Ethernet ports
• 10/100/1000 uplink ports (available on some models).
• Dual-purpose ports (available on some models).
• SFP module slots (available on some models).
• PoE/PoE+ ports (available on some models). See Power over Ethernet Ports, page 1-9.
• RJ-45 console port
• USB mini-Type B (console) port
• LEDs
• Power connectors
• Alarm connector
• Flash memory card slot
The following figures depict the components available on the various models in this product family. Not
all models are illustrated.
Figure 1-1 Cisco IE-2000-4TS-L Front Panel View
1 10/100 Ethernet ports (downlink ports) 6 Power connector DC-B
2 SFP module slots (uplink ports) 7 Alarm connector
4TS
±12/24/48
0.5-2.0A
1
3
2
4
5
6
7
8
331547
9