Filter
Top Products
1
Doc. No.
Copyright © 1995
Cisco Systems, Inc.
All rights reserved.
Cisco 7000 and Cisco 7507
Chassis Replacement Instructions
78-1064-02
Product Numbers: CHAS-7K, MAS-7K, CHAS-7507, MAS-7507
Customer Order Number: DOC-781064=
This document contains instructions for replacing a Cisco 7000 and Cisco 7507 chassis as a spare
part.
Note With a few exceptions, the chassis replacement procedures are identical for both chassis;
therefore, throughout this document, both chassis are referred to as the chassis; the exceptions are
clearly noted.
You will remove the processor modules and power supplies from your existing chassis and install
them in the replacement chassis. The term processor modules refers to the RP, SP (or SSP), and
interface processors in the Cisco 7000, and the RSP2 and interface processors in the Cisco 7507.
These instructions are applicable only to systems that are already operational and for which first-time
installation and startup verification has been performed. If you have not already installed the system
and verified that it operates properly, or if you are moving the chassis to a new location, refer to the
Cisco 7000 Hardware Installation and Maintenance or Cisco 7507 Hardware Installation and
Maintenance publications for installation information.
The sections in this document include the following:
• Product Overview, page 2
• Prerequisites, page 6
• Unpacking the Chassis, page 11
• Replacing a Rack-Mounted Chassis, page 11
• Moving System Components, page 18
• Verifying the Installation, page 24
• Cisco Information Online, page 48