Filter
Top Products
1-9
Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide
OL-23421-02
Chapter 1 Product Overview
Router Compact Flash Memory Cards
Router Compact Flash Memory Cards
Compact flash cards can help you configure new or replacement routers, and to recover the configuration
of a failed router. For example, if the Connected Grid Swap Drive feature is enabled, you can transfer
the same system configuration information from one router to another by using a compact flash memory
card (or compact flash card) while the routers are operating. This is done by inserting an optional
compact flash card in slot CF1 and copying all contents of CF0. After the copy operation is completed,
you can remove and insert this compact flash card unit in slot CF0 of either a new router or a replacement
router for a failed unit. When the new or replacement router is rebooted, it uses the configuration from
the compact flash card as the running and startup configuration. This functionality enables you to
quickly configure new or replacement routers with a standard configuration with little or no manual
configuration required.
FE0/1 to
FE 0/8
Indicates state of the Fast Ethernet ports:
• LED is flashing green—data transmission is taking place.
• LED is off—the link is down.
• LED is solid yellow—the port is in an error state (disabled).
GE0/1 Indicates the state of the Gigabit Ethernet dual purpose port:
• LED is flashing green—data transmission is taking place.
• LED is off—the port is down.
• LED is solid yellow—the port is in an error state (disabled).
GE0/2 Indicates the state of the 1000 Mb/s SFP module slot:
• LED is flashing green—data transmission is taking place.
• LED is off—the port is down.
• LED is solid yellow—the port is in an error state (disabled).
Table 1-6 GRWIC-D-ES-2S-8PC Switch Module (Copper Model) LED Descriptions (continued)
LED Description